LongBoardSkaters

Here are some pictures I took of the indo boards that I have made at my fathers house.

This is my custom Red and black homemade indo board. For this board i used a template I made and traced it on a sheet of wood with viner on the top. the wood is about 1" thick. The Roller is a 15" long with a wi 4 1/2"  PVC pipe from Lowes with duck tape around to give it grip to the board. Grip on the board is 2 pieces, 1 piece of red grip tape cut in two and a black piece cut too a third. There are blocks in the front and back like the real thing. all the boards that I  have made are about the same weight and general length and shape of the regular model of the Indo board. Even though mine is of my own creation and design.

This one is the same design and roller size ecxept this one has a roller that I wraped green grip around in two spots close to the center similar to the real indo boards roller. This is a green sheet of grip tape cut into thirds and using two of the thirds on the outside and a whole 2/3erds piece in the center and the left over green strip is used on the roller. Also the one with out grip in the back is the same as the others just has no grip tape on it. It still works great and looks classic. Soon it will have clear grip on it hope it still looks as good after its done. So far I have made five of these things and there pretty simple to make look back for a step by step instructions.

Here is were u can find the real thing www.indoboard.com there Cool and worth the 100 bucks but I would just make one its more fun than buying one and cost alot less. Soon i will be buying one of the real ones to see how they stack up to the home made ones.